Offset Smoker 15070

Duy's Oven

Contact for quote

Smoker with precise air flow and temperature control for both hot and cold smoking.

  • Precise Air Flow & Temperature Control
  • Hot and Cold Smoking
  • Efficient Offset/Hybrid Combustion Chamber
  • Thick Steel, Excellent Heat Retention
Order / Consultation All Products How to use

Short film · Twelve Hours

Twelve Hours by the 15070

At five in the morning, a daughter lights a small fire in the side firebox to smoke a whole brisket for her dad's birthday. Stage one stays below 100°C, stage two climbs to 110 to 135°C, and lifting the lid at dusk reveals a pink smoke ring. Every shot of the smoker, fire, smoke, and meat was filmed live on the 15070; the characters are AI-generated.

Burning charcoal and wood produces carbon monoxide (CO): operate outdoors in well-ventilated areas only.

User Guide

Using the Offset 15070 in 8 steps

The Offset 15070 is the same offset type as the Offset 10050, with the firebox set off to one side, so it uses the same steps. The clip and the steps below are built on the 10050.

  1. 1

    Preparation

    Texas-style rub: coarse sea salt and coarsely ground black pepper, 1:1. Set the smoker outdoors in an airy spot away from anything flammable, with the firebox end facing away from the wind.

  2. 2

    Light the charcoal

    Light the mangrove charcoal until it glows evenly; never use petrol or oil. The 10050 takes about 4 kg; the amounts of charcoal and wood go up or down with the size of the firebox. Open the air vent 100% at first and lay oak on the coal bed.

  3. 3

    Hold the heat with the air vent

    Wait until the smoker holds steady at 110 to 135 °C, with 121 °C as the standard mark, before putting the meat in. Adjust the heat with the firebox air vent and keep the chimney open for the whole cook.

  4. 4

    Read the smoke, add oak

    Good smoke is thin, slightly blue and almost invisible. Thick, billowing white smoke means the fire lacks oxygen: open the air vent more, do not choke the chimney damper. Add oak one log at a time, about every 45 to 60 minutes, while the coals are still red.

  5. 5

    Put the meat in

    The end next to the firebox runs hotter than the far end, so rotate the meat mid-cook. Opening the lid drops the needle; do not pile on charcoal when you see it fall.

  6. 6

    Cook to core temperature

    At around 68 to 77 °C the core stalls for hours: do not raise the fire, just wait or wrap in butcher paper. Core temperature decides: brisket about 96 °C, beef ribs about 93 °C, pork ribs about 91 °C.

  7. 7

    Rest the meat

    Take the meat out, wrap it loosely and let it rest 30 to 60 minutes before slicing across the grain.

  8. 8

    Clean up after the cook

    Take still-glowing coals outdoors and let them burn out completely. Scrape the grates while still warm, empty the ash and grease, scrape the grease off the chamber floor. Once cool, wipe with a damp cloth and brush a thin layer of cooking oil on the grates.

Safety: burning charcoal gives off CO gas. Only run the smoker in a well-ventilated place, never in a closed room. Do not leave charcoal smouldering indoors overnight.

Detailed specifications

Figures taken straight from the workshop's records, updated whenever the build changes.

ModelSmoker 15070L
Fuelwood
Dimensions (W×D×H)1.7 m × 70 cm × 1.3 m
Weight145kg
Capacity600L
Grates4 grates
Grate 147x68cm (2 grates) — stainless steel
Grate 267x68cm ( 2 grates ) — stainless steel
Chimney Pipe1 m
Coatingstainless steel with heat-resistant paint
Grilling technologysmoking
Thermometer2
Wheel4
Capacity per batchAbout 30 – 50 kg of food
Grill typeOffset, firebox set off to one side
Combustion Chamber2 doors
Drain holesAt both ends of the smoking chamber

🎁 Accessories included

  • Included accessories : 2 temperature gauges
  • Grill grate : 4 grates
Compare size with similar ovens →

Need help choosing the right model?

Contact us now